WEEKDAY HOURS  •  10am - 7pm

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Yakima 15mm x 110 Fork Adapter
$59.99
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima 8 Hole Chainstraps
$6.60
Chainstraps for a multitude of rear of car bike racks.
Yakima ArmLock Cable Lock
$34.99
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
Yakima BackSwing
$329.99
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Yakima BaseClip
$63.00
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima Boa Wheelstrap
$7.70
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Bolt Toploader Brackets
$59.00
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
Yakima Bow/Stern Tiedowns
$39.00
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima Chain Straps
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima Crossbar Pads
$30.00
Anything you can put on the water you can put on a pair of these 20\u001D foam pads. Theyre designed to protect your gear and crossbars during loading and on the road. - Fits round and square crossbars. - 20" wide foam pads for flexible configuration - Fits Yakima round and square crossbars Works great with BigStack, KayakStacker or Heavy-Duty Straps - Comes with 2 pads per package
Yakima DeadLock
$49.00
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Yakima End Caps
$12.00
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima Eye Bolts
$29.99
Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in
Yakima Fairing
$84.99
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
Yakima Fat Straps
$12.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Yakima Fork Adapter
$59.00
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima GateKeeper
$169.00 - $169.99
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Yakima HandCuff
$49.99
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Yakima HandRoll
$129.00
Designed to help you easily get any type of kayak up on your roof, the HandRoll’s rubber rollers provide load assist with grip, stability, and protection. The bases pivot to automatically fit the shape of your boat, then lock tight to cradle it while traveling. The universal mount fits most roof racks – no tools needed, and heavy-duty straps and tie-downs are included to keep things secure. - Sold in pairs – combine with HandRoll or an additional DeckHand to complete the set - Large rubber rollers provide a built-in load assist to help guide your boat into place - Durable rubber pivoting rollers adjust to boat shape for secure loading - Roller pivot design automatically adjusts to boat’s shape for a secure hold - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Locks to roof rack with SKS Lock Cores (sold separately) - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
Yakima Heavy Duty Straps
$33.00
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Yakima HitchLock
$29.99
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Yakima Holdup Wheelstrap
$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima K328 Fitting Kit
$126.00
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima Landing Pad 2
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 3
$35.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 4
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 5
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 6
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 7
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Yakima Landing Pad 8
$63.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.
Page 1 of 5 Next page