Skip to main content
We're open weekdays from 10am - 7pm

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Shimano Altus M361-L Crankset
$51.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Selle Royal Scientia Moderate
$79.99
Selle Royal, along with researchers from the Sport University of Cologne, the largest sports university in Europe, have applied theory, data and methods to bicycle saddle research in an attempt to unmask the fundamental design characteristics essential to optimizing well-being and overall cycling performance. The result is SCIENTIA, a full spectrum of 9 ergonomic saddles scientifically engineered to precisely and comprehensively fit each rider. With its outstanding design based on a scientific research, this saddle guarantees the ultimate level of comfort that perfectly fits the moderate rider. Padded with the 3D skingel, specifically positioned in the Central Reservoir for the soft tissues, it avoids shocks due to the innovative Curva Suspension. Sizing - M > 1 (Small) fits riders with less than 11cm of ischial variation - M > 2 (Medium) fits riders with 11-13cm of ischial variation - M > 3 (Large) fits riders with more than 13cm of ischial variation Dimensions/Weight - M > 1 (Small): 289mm long x 141mm wide / 425g - M > 2 (Medium): 289mm long x 161mm wide / 455g - M > 3 (Large): 289mm long x 178mm wide / 465g
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
Bontrager Speed Concept Seatpost Cap
$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Race Face Next R 35 Handlebar
$169.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
SRAM PG-1030 10-Speed Cassette
$69.99 - $74.99
SRAM's PG-1030 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette is available in four configurations perfect for riding off road, including one with a 36-tooth largest cog for super-easy climbing.
Magura HS33 R Hydraulic Rim Brake
$168.00
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)
RockShox 30 Silver TK 26-inch
$168.99
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"
Problem Solvers Locking Headset Spacer
$11.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
Whisky Parts Co. No.9 Mountain Fork
$550.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
ODI Hucker Signature BMX Flange Grips
$13.49
Mike “Hucker” Clark brings his SoCal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance. The 160mm grip’s California-inspired beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most. - Features a unique two material design that allows for improved bar adhesion and less grip slippage - Soft vertical ribs provide excellent padding - Horizontal ribs on front of the grip offer improved traction
Bontrager Rhythm Pro Stem
Bontrager's Rhythm Pro Stem is engineered for the rigors and punishment of aggressive, all-mountain riding. Thanks to its forged 7050-T6 aluminum construction, it's strong, light and stiff. The CNC-machined 4-bolt faceplate is ultra tough and evenly distributes the clamping force on carbon bars. And, the opposing 2-bolt steerer clamp is safe and secure, even for carbon steerers.
Bontrager Supertack Visibility Handlebar Tape
$29.99
Your hands aren't going anywhere Your grip is the last thing you should be thinking about while turning the pedals. Keep riding through all weather conditions in confidence with the no-slip grip Supertack Handlebar tape. Shock-absorbing foam adds an extra layer of awesome. Key features - Super-tacky texture for no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam for added comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing Details - Material: Microfiber
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Delta Stem Raiser
$36.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Ergon GP1 Grips
$34.99
Ergon GP1 Grips feature an anatomical design that eliminates pressure on the nerves in your hands and creates a natural wrist angle for the ultimate in comfort. Complementing the sweet feel, these great grips also offer excellent pressure distribution with 100% support for your hands versus the 60% support you get from conventional models. You get more grip to hold on to, which improves your control for all types of riding — even technical off-road use. Ergon grips also boast built-in bar clamps for fast and secure installation. Try them today!
Bontrager Blendr Elite Stem Bases
$7.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
Surly Stainless-Steel Chainring (130mm BCD)
$50.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Surly Stainless-Steel Chainring (104mm BCD)
$35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Bontrager Verse Pro Bike Saddle
$219.99
An ultra-light performance saddle with a carbon-reinforced shell and a full cutout for targeted support and soft tissue pressure relief for riders of all genders and disciplines. For mountain, for road, for men, for women Our most versatile performance saddle puts you in a power posture for speed and control wherever you ride. Verse Pro is built with ultra-light, oversized carbon rails, a carbon-reinforced shell, and an inForm design with a full cutout shape for the ultimate in comfort and performance. Plus, it's equipped with a rear-facing Blendr mount for a Flare tail light. Product details - Saddle design supports riders of all genders in a performance riding position on road and mountain bikes - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Oversized carbon rails for lightweight strength (specific seat post ear clamps required) - Lightweight carbon-reinforced shell provides perfect balance of weight, strength, and compliance - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Available Blendr accessory mounts to cleanly integrate rear light
Giant D-Fuse Zero Offset Seatpost
$81.00
- Giant proprietary D-Fuse seatpost - Composite construction with Alloy clamp - Zero offset configuration - 380mm length
Serfas RX (Lycra Top) - Women's
$64.99
Serfas' Women's RX saddle is your prescription for riding in comfort. It boasts a cutaway top that minimizes pressure, dual-density padding for cushioning, and a protective layer of friction-fighting Reactive Gel. What's more, the Twin Bar design allows each side to flex independently for even more comfort while the four-way stretch Lycra top increases the saddle's longevity. • Twin Bar Design • Rails: Steel • Size: 267mm x 171mm • Weight: 485 Grams • Cover: Silk-Tech Lycra
SRAM PC-951 9-Speed Chain
$24.99
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.
Crank Brothers Stamp 1 Large LE
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
CeramicSpeed ITA Bottom Bracket for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
Fizik Vento Argo R1
$225.00
VENTO ARGO R1 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R1 140 - Length: 265mm - Width: 140mm - Weight: 179g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm SPECIFICATIONS: VENTO ARGO R1 150 - Length: 265mm - Width: 150mm - Weight: 186g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm