BMX

Black Label's 6061 Sprocket is machined from 1/4-inch thick 6061 aluminum for awesome strength and durability. An adapter for 19mm axles is included.

Ride Black Label's Front Wheel in the park, street or at the dirt jumps. This sweet 20-inch wheel is strong and ready for action thanks to a 36-spoke build, a fine sealed-bearing Black Label hub with a 3/8-inch axle and a tough, light aluminum rim.

Black Label's Mid BB Set includes bearings, washers, a center spacer, and cones. It's for use with 19mm crank axles.

Ride Black Label's Moto Front Wheel in the park, street or at the dirt jumps. This standard 20-inch wheel is strong and ready for action thanks to a 36-spoke build, a quality hub with a 3/8-inch axle and a tough, light aluminum rim.

Ride Black Label's Moto Rear Wheel w/Driver in the park, street or at the dirt jumps. This sweet 20-inch wheel is built for action with 36 spokes, a tough, light aluminum rim and a quality hub with a 14mm axle and a 9T one-piece driver.

Roll on Black Label's Rear Wheel w/Driver in the park, street or at the dirt jumps. This sweet 20-inch wheel is built for action with 36 spokes, a tough, light aluminum rim and a sealed-bearing Black Label aluminum cassette hub with a 9T Driver and 14mm axle.

Rolling on 18s? Upgrade to Black Label's Vise 18-inch Rear Wheel. It's strong thanks to a 36-spoke build, a quality hub and a tough and light aluminum rim. It's available in a 9T driver and 14mm axle model or Microdrive with a 3/8-inch axle setup.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- Sold in pairs - Allen wrench included

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

- Press fit designed to work the hub's non-drive side collar.

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

The Springfield lever features an easy to install and remove design. - Easy to install and remove without having to wrestle grips on and off - Die-cast clamp design

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm