Bike World Iowa has forks that strike the perfect balance of lightness, strength and ride quality
$54.99 - $59.99
• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork
• Caliper brake mounts • 45mm rake • Chromoly construction • Threadless fork • 300mm steerer length
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4 - Steer Tube length: 260mm - Steerer Type: Straight - Weight: 1000g - Wheel Size: 26-inch
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
The OneLoc remote from RockShox provides total control over your RockShox fork at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes, and RockShox's Reverb remote (all sold separately). Includes remote, cable and housing.
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Built to go fast and high, the Patrol fork by WeThePeople uses 4130 "M2" Chromoly tubing and features CNC machined micro dropouts that perfectly match the dropouts on the Patrol frame. Rounded off with its own 7075 alloy top cap, if you're looking for a strong, dependable fork with classic styling, look no further. - Lightly tapered legs - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45deg bearing *Please Note: WTP does not recommend the use of pegs on the Patrol fork
Following input from WeThePeople flatland riders Waldemar Fatkin and Dustyn Alt, the Utopia Fork is reborn for 2018 and now features zero degrees of offset to suit technical flatland riders who need a bombproof fork. The smooth tapered legs and extra strong slotted dropout design make this thing the perfect zero offset fork for flatland riders wanting to put their fork through some serious abuse. Available with or without brake mounts depending on what side of the century you started riding. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC'd steerer, single butted - Integrated crown race designed to work with integrated headsets with a 45° bearing - Laser cut and CNC'd, 5mm, 4130 CrMo, heat-treated for 3/8'' (10mm) axle - 7075-T6 alloy top bolt, M24 thread, 3/8” socket wrench fitment
The WeThePeople Message Fork is a super tough, yet elegantly designed fork for park riders looking for a balance between strength and weight. Using a super tapered leg, shorter 28mm offset, and a unique investment cast fork cap, the Message fork comes with a reinforced longer steerer tube allowing you to run a Gyro or your personal choice of spacers to dial in your bike to perfection. - Investment cast fork cap - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing - Full liquid post heat-treatment on 4130 “M2“ CrMo - Fully CNC’d steerer, internally and externally butted
The WeThePeople Patron Fork is all about choices. The 7mm full investment cast, heat-treated hollow dropouts are what make this fork so special. The go-to choice for many of WTP's pro team, the Patron Fork might just be the last fork you ever buy. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC’d steerer, single butted - Integrated crown race, designed to work with integrated headsets with a 45° bearing - 7mm, full investment cast, 4130 Chromoly, heat-treated, for 3/8''(10mm) axle - 7075-T6 alloy top bolt, M24 thread
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
Upgrade your BoXXer with RockShox's Solo Air spring with revised spring curve and air spring tunability with Bottomless Tokens (4 included in package). This kit is compatible with BoXXer World Cup forks from 2011 to 2014 (serial number later than 16T11XXXXXXX).
$25.00 - $28.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Offset: 46mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 160mm - Wheel Size: 27.5" , 27.5+ - Stanchion Diameter: 35mm - 27.5 x 2.8" maximum tire size
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
Get the advantages of a carbon fork at a sweet value with Ritchey's Comp Carbon Fork. The Comp reduces road vibration thanks to the inherent qualities of carbon. Plus, this fork is light and durable, making it a fine upgrade for any road bike.
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Meet the BoXXer designed for the next generation of DH superstars. Built from the ground up for big wheels, the all-new BoXXer gets new lower legs, new upper tubes and new, a MX-inspired crown that allows optimized handlebar height. The new DH-specific DebonAir air spring offers riders the best attributes of coil and air: low breakaway force, good mid-stroke support, linear feel, and tunable progression. And the Charger 2 RC2 damper offers independent high- and low-speed compression adjustment. - BOOST 20x110 - 35mm aluminum Fast Black upper tubes - New Charger 2 RC2 damper with independent high- and low-speed compression adjustment - New DH-specific, friction-reducing DebonAir air spring - New flat crown lowers handlebar height, compensating for taller wheel and tire combinations - New graphics with a BoXXer Red fork color option - Continues to be the lightest production downhill fork on the market
When RockShox re-launched Pike in 2013, it immediately became the benchmark for Trail and Enduro forks, with a supple and progressive feel that simply could not be matched. To ensure Pike’s continuing domination of the class, we put it on a weight-loss program, added the new Charger 2 Damper, included remote options, and gave it a graphic-package makeover that aligns with the all-new Pike’s chassis design. Riders will benefit from Pike’s increased steering authority—thanks to BOOST-only spacing, stiffness and lighter overall weight—the new friction-reducing DebonAir air spring, and the potential to run wider (2.8") tires. - Every aspect of the all-new Pike has been optimized to guarantee stiffness and signature ride quality while focusing on weight reduction - Pike now focuses on Trail, leaving longer-travel Enduro applications to Lyrik - All-new chassis and all-new look - New Charger 2 Damper with OneLoc remote options - 160mm max travel for 27.5" and 140mm max travel for 29" options - Updated air pressure guides maximize performance for E-MTB applications - New DebonAir air spring for increased small bump sensitivity and mid-stroke support. - External rebound damping adjustment - Low speed compression adjustment - 3-position compression adjustment (Open/Pedal/Firm)
The RockShox Recon sets the benchmark for value-based performance. Recon represents a perfect partnership between Reba’s lower legs and bombproof RockShox steel Fast Black upper tubes. Adopting the Reba chassis allowed the design team to employ shorter upper tubes, which means Recon just went on a serious weight-loss program. The Motion Control damper features low speed compression adjustment to lockout. - NEW "E-MTB" decal for Diffusion Black options - Fast Black steel upper tube finish - Solo Air spring - Right OneLoc remote included
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Page 1 of 4 Next page