Filter By:
Riser
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep
$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it?
- Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform
- Requires 35mm bar clamp diameter stem
- Full 800mm width that can be trimmed down to a minimum 750mm
- 8 degree rearward sweep, 5 degree upward sweep
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
$179.99
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep
$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
$179.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world.
SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance.
- SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight
- Minimum bar width of 28" or 710mm at indicated cut marks
- Reinforced clamping zones for lock-on grip
- Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
$184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse…
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- Gold Standard of DH is now wider and stronger
- 820mm width for maximum control
$22.19
These 42cm alloy riser handlebars are awesome. Designed by Pure Fix Cycles in California.
- Perfect for fixies and urban warrior steeds
- 16.5" Wide
- 2.25" High
- These bars have an ISO standard 25.4mm stem clamp diameter and 22.2mm brake clamp diameter
$45.00
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
$68.99
A25Y Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$89.99
- 7050 ProTaper alloy optimizes strength while reducing weight
- Cut mark graphics aid in customizing fit
$104.99
A25 Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$184.99
- Features PFL (Plastic Foam Lamination) manufacturing
- PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars
- The process uses less excess resin and fewer plys, resulting in a 15% lighter bar
$32.39
Origin-8's Urban MX Riser Handlebar is made from lightweight, durable 6061 aluminum. It provides a 60mm rise and a narrow 560mm width. A large grip surface leaves you plenty of room to move your hands or mount necessities like lights, bells, and computers.
$33.99
Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
$44.99
Origin-8's MX Mini Urban Handlebar is made from lightweight, durable 6061-T6 aluminum. It provides a 75mm rise and a 600mm width, along with moto styling.
$44.99
Origin-8's Pro Urban Riser Handlebar is a wonderful ride companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
$49.99
Origin-8's Pro Rise All Mountain Handlebar is made from lightweight, durable 6061-T6 butted aluminum. It provides a 40mm rise with a wrist-friendly 5-degree sweep and a 625mm width.
$49.99
Origin-8's aluminum Stash Bar Riser handlebar will be right at home on your fixie or urban steed. A generous 25mm riser gives you a great perch to scan the world ahead and it's super narrow so you can dodge and weave with ease. The cool spherical aluminum end caps are removable if you prefer a more muted look.
$69.99
- Economical 6066 aluminum alloy mountain handlebar
- 800mm width
- 3 rise options
- Back sweep: 7°
- 310-350g (Depending on rise dimension)
$79.99 - $99.99
Origin-8's Space Off Road II Handlebar is ready to explore the final trail frontier. This radical bar is crafted from lightweight aluminum and features a 50mm sweep and 37.5mm rise. But it's not just for looks — it lets you distribute your weight and hand placement in multiple ways for more control and comfort.
$84.99
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$84.99
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$84.99
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$89.99
- AL7050 tubular alloy construction
- 31.8mm clamp diameter
- 800mm width
- 7° back sweep
- ISO-Mountain safety certified
- 310-350g (Depending on rise dimension)
$92.99
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$99.99
- AL7050-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$219.99
- Full UD carbon construction
- 31.8mm clamp diameter
- 9-degree back sweep
- EN-Mountain safety certification
- Upsweep / Drop: 4-degree
- Back Sweep / Bend: 9-degree
- 200g
$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$259.99
- Full UD carbon construction
- Textured surface at bar clamp and grip areas
- 35mm oversized clamp diameter
- 800mm width
- 7° back sweep
- 5° upsweep
- ISO-Mountain safety certified
- 225g
$74.99
Odyssey Shortcut BMX Handlebar
- Butted 20mm crossbar
- 1.8/1.3mm thick, multi-butted main tubing
- Large radius bends for greater durability
- Post-weld heat-treated for added strength
$84.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$89.99
The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly.
- Aaron Ross signature
- Proven 41-Thermal processed 4130 chromoly
- Multi-Butted, traditional 7/8" crossbar for strength
$104.99
The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty.
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$109.99 - $119.99
Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees.
- 41-Thermal Lifetime Warranty
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$49.99
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel!
- 7/8" (22.2mm) BMX style clamp (so you'll need a BMX stem to use them)
- 4” rise
- 28” width
$123.10
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind.
- UD carbon and AL6066 material
- Carbon Structural Integration (CSI)
- Textured stem clamp zone
- 18mm rise
- 9° backsweep, 4° upsweep
- UD carbon finish
$146.60
- Light enough for XC, but strong enough for Enduro and Trail
- Carbon composite construction
- Reinforced and textured clamping areas, with markers for accurate shortening
- 5/8 degree with +10mm setback
$26.99
Original equipment specifications.
- 25.4mm clamping diameter
- Sandblasted silver finish
- 27 degree backsweep
$31.99
Grab life by the handlebars.
- Original equipment replacement for Townie Original bikes
- 6061 alloy with an anodized finish
Easton's EA30 Riser features their famous TaperWall aluminum construction for low weight, maximum fatigue strength and outstanding stiffness. Plus, the 27-inch-wide EA30 provides added control for tough technical sections and its rise puts you in an ideal body position for confidence on a variety of terrain.
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep
$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$72.99
Feel the difference
The inForm Satellite Plus IsoZone system is the comprehensive defense against hand and wrist discomfort. By pairing integrated elastomer handlebar inserts with advanced ergonomic grips, this bar and grip combo reduces peak hand pressure by nearly 30% while reducing vibration and absorbing impact for a smoother, more enjoyable ride.
Product details
- Custom-butted, 6061-T6 alloy construction
- IsoZone elastomer inserts offer reduced upper body fatigue
- Performs best when combined with inForm IsoZone grips (included)
Specifications
- Backsweep: 9 deg.
- Upsweep: 4 deg.
- Material: Alloy
- Weight: 487g
Previous page
Page 2 of 2