Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$399.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
$249.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
NOTE: This product contains pedal bodies only, spindles and electronics are not included.
In the box:
- Left and right pedal bodies (SHIMANO SPD-SL style)
- Replacement seals
- 55 mm Q-factor washers
- Battery doors
$179.99
The ultimate weight-saving upgrade.
- The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present
- Weight: 60g per pair
- Spindle material: 6al/4v titanium
- Max. rider weight: 200lb/90kg
- Q-factor: 52 mm
$119.99
- Custom pedal adaptor set
- Allows foot to be fastened to any pedal front and rear
- Great for lost mobility or handicap applications
- Allows for up to size 13 shoe
- Includes plates, hardware, and front/rear strap system
$75.00
The Vision Light Kit is the solution to take your Geo Trekking or Geo Trekking Roc Pedals into the night. Ride with increased safety and visibility in traffic when the sun goes down thanks to the 3 different flash modes, an autonomy of over 30 hours, and the oscillating light beam created by the constant rotation of the pedals. The convenient clip system makes the kit quick and easy to install. As the Vision Light is independent from the pedal, it can be easily recharged via a simple USB cable.
$65.00
The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw.
- The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each)
- SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578).
- Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585).
- Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).
$54.99
Make every effort count with the SPEEDPLAY standard tension road cleat. This integrated system delivers the power and engagement required to take on everything from steep climbs to all out racing. The only system to feature continuous 3-axis adjustability for all out performance and comfort on the bike.
What's Included?
- Cleat Assembly (Including Cleat Surrounds)
- Screw Packet
- Quick Start Guide
- Important Product Information Guide
- Additional Tools Required for Assembly: #2 Philips Head Screwdriver
$53.59
Converts 3-bolt LOOK style shoes to SPD MTB compatible cleats
$51.00
The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.
$51.00
The soft rubber Activ Grip City pads feature our exclusive LOOK Activ Grip technology developed in partnership with Vibram and are compatible with our Geo City platform pedals. They offer the best foot-to-pedal connection we have ever designed, with exceptional grip, wear resistance and durability.
$51.00
The Activ Grip Trail Pads are compatible with our Trail Grip platform pedals. Built from extremely strong and durable material and designed in collaboration with outdoor specialist Vibram, they offer exceptional traction on the toughest rides. Their concave geometry is enhanced with large rubber lugs and composite studs for optimal foot stability and extreme durability to take on the challenges of any terrain.
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps
$45.99
Origin-8's Leather Toe Clip Straps are made from real, high-quality leather and feature the classic, double strap design.
$45.99
- Super-strong foot retention pedal strap system
- Large Velcro and durable polyester top cover
- Anti-Slip tension design
- Fits most platform pedals
- Will not fit standard cage pedals
$44.99
The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable.
- One pair is included in the kit.
- Pedals not included - mounts to standard TerraTrike pedals.
- One size fits most.
- Convert standard pedals to pedals with heel support straps
- Securely holds heel of foot when going over bumps
- Fits TerraTrike and many other standard pedals
- Easy sizing with straps
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel
$39.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising.
- Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay
- Cleats not included
- 85 x 95 x 10mm platform
- Hardware included, cleats not included
$36.99 - $39.99
Keep your feet on the pedals and mash happy. Straps are the perfect intro to foot retention for those that aren't ready to go full-clipless yet. Get more out of your pedal strokes, stay strapped.
These Pure Pro footstraps are made out of ballistic nylon and military-grade parts. The best quality on the market, these straps will assist in your perfect pedal stroke along with helping you skid to a stop in fixed gear. Comes with left and right straps, but pedals aren't included!
$22.99 - $35.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11
$33.59 - $34.79
Origin-8's Double Steel Toe Clips feature the classic toe clip look and style, with double strap compatibility. And, they are built to the same standards held for Japanese Keirin racing.
$33.19
- Genuine leather-wrapped chrome plated steel
- Hardware included
$32.99
- Engineering-grade thermoplastic construction
- SPD-SL compatible interface
- Cleat Type: SPD-SL
$29.99
Origin-8's RC Look Cleats are compatible with Look pedals. The Red offers 10 degrees of float, and the Black has no float (fixed position).
- These cleats use the Look/SPD-SL bolt pattern.
$29.99
LOOK KEO compatible road cleats
- Unique 2-piece design allows you to change cleats without losing position
- Durable, high-traction walking surface
- Hardware included
$29.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
- Weight (pair): 30 grams
- Shoe compatibility: SPD
- Release angle: 15 degrees
$25.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g
$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Inner bearing o-ring x 2
- Spindle seal x 2
- Outer Igus solid bearing x 2
- Inner Igus solid bearing half x 4
- Bearing Retainer Bolt x 4
- Outer o-ring x 2
- Grease port screw x 2
- Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
$24.99
Kit Includes premium components:
- Inner cartridge bearing x 2
- Outer cartridge bearing x 2
- Igus solid bearing x 2
- Inner seal x 2
- Bearing locknut x 2
- Spindle screw (Left) x 1
- Spindle screw (Right) x 1
$24.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$24.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$24.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$24.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$13.00 - $24.99
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g
$23.99
Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.
$23.95
Official replacement cleats for Ritchey mountain bike pedals.
- Includes a pair of cleats and mounting hardware
- Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals
$23.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g
$23.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.
$23.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$23.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$23.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)
$21.99
Reliable and Durable 2-Bolt Cleat
Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions.
Features:
- Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat.
- Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals
- Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike
- Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises
- Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions
PREDICTABLE ENGAGEMENT
With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain.
USER FRIENDLY
Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.
$21.99
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
- Not compatible with Shimano PD-M858 (XTR) SPD pedals
$21.99
- Compatible with all Spike & Oozy Pedals
- Full Complement Sealed Bearing x 2pcs
- Green Silicone Friction Seals
- Replacement inboard bearings for your SPIKE or OOZY pedals.
$21.95
- Cleats to fit Ritchey Echelon and Look Keo clipless pedals
- Includes a pair of cleats and hardware
$21.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Lateral
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g
$21.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g
$20.99
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals.
- These cleats use the Look/SPD-SL bolt pattern.
$20.99
Origin-8's Look Delta Cleats are compatible with Look Keo-style pedals. They feature 9-degrees of float.
- These cleats use the Look/SPD-SL bolt pattern.
$20.19
- NJS/Keirin certified chrome plated steel clips for single toe strap
- Hardware included
Page 1 of 2
Next page