Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Stages Cycling Shimano Ultegra 6800
$579.99
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
Wheels Manufacturing Inc. 386 EVO Adapter for 22/24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$50.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing Inc. BBright Adapter for 22/24mm Spindle Cranks
$50.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$40.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
SR Suntour XCT Left Crank Arm
$19.99
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Shimano Crank Bolts
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
Sunlite Aluminum Crankarm (Left)
$14.99 - $16.99
• Square taper interface • Only includes left crank
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$5.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Race Face Chainring Bolt Pack
$5.00
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Page 1 of 1