Filter By:
Hubs
$53.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$99.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$460.00 - $470.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$70.39 - $70.99
- Aluminum hub body
- Sealed bearings
- 100mm OLD
- 6-bolt disc rotor mount
$54.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Front
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
$54.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Rear
- Gears: Flip/flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
$49.49
- Includes 9T Micro drive cog
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Drilling: 36H
- Axle: Nutted 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Loose
$51.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
$116.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 36
$93.49
- Heat-treated axle for improved strength
- Angled flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Axle: 14mm, 3/8-inch
- Material: Alloy
- Drilling: 36
$93.49
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-Pawl Cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Spacing / Axle: 14mm
- Material: Alloy
- Drilling: 48
$52.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear
- Gears: Flip-flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
$174.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
$68.99
Shimano XT FH-M756 Series Rear Hub
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-Bolt rotor mount
- Bearing Type: Loose Ball
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- Center to Flange, Left: 33.5
- Center to Flange, Right: 20.5
- Flange Diameter Left: 61
- Flange Diameter Right: 61
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Rear Axle: QR x 135mm
- Skewer Included: Yes
- Spoke Interface: J-Bend
- Weight: 495 grams
$139.99
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- Thru axle design with 8-10 speed cassette and XD drivetrain options
- Brake Type: 6B
$119.99
- Elite Series road hubs
- Straight pull and J-bend spoke options
- Sealed bearings
Straight Pull Spoke:
PCD-L: 30.3mm
PCD-R: 30.3mm
LTF-L: 13.1mm
LTF-R: 13.1mm
CTF-L: 36.9mm
CTF-R: 36.9mm
J-Bend Spoke:
PCD-L: 31mm
PCD-R: 31mm
LTF-L: 10.78mm
LTF-R: 10.78mm
CTF-L: 39.22mm
CTF-R: 39.22mm
$55.05 - $71.79
- Centerlock, 11- speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included
- Spacing / Axle: QR
- OLD: 100mm
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$475.00 - $485.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
- Weight: 313 grams
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$92.79
- Forged aluminum construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc rotor compatible
- 8/10-speed cassette compatibility
- Quick-release
- 135mm hub spacing
$70.39
• Aluminum hubs
• Sealed bearings
• Quick release
• 8-speed cassette
• 36-hole
• 135mm rear spacing
• Black or silver
$69.99
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Lightweight, hollow, heat-treated axle
• Fix/fix hub threading
• 32 and 36-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, and white
$89.99 - $132.19
- Aluminum hub
- Sealed bearing
- Black
- 6-bolt disc brake rotor mount
$129.99 - $201.99
- Aluminum hubs
- Sealed bearing
- Black
- 6-bolt disc rotor
Page 1 of 5
Next page