$59.99 - $64.99
A true all-purpose rim, WTB's LaserDisc is perfect for just about every trail on the mountain. Its 21mm inner width accommodates a wide range of tires from narrow XC treads to meaty downhill knobbies, while WTB's I-beam construction boosts strength and stiffness for outstanding reliability and cornering precision. The LaserDisc also features WTB's Global Bead Seat technology to lock tires into place for extra confidence on demanding terrain.
$89.99 - $99.99
Want your all-mountain trail rig or Super-D ripper to be faster? Lace up some Stan's ZTR Flow rims and get after it. These hoops are tough enough for aggressive trail riding, slalom racing and hard charging yet still light enough to be pedaled back up the hill. The Flow also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
$79.95 - $89.95
Mavic's Open Pro rims are the reference point for high-end wheel building. Light and strong Maxtal aluminum, Mavic's control-enhancing UB brake surface, double eyelets, and low-profile double-walled box construction add up to a rim that's fast enough to race and durable enough to ride every day
The ME14A is a great choice for all-around performance. PRODUCT SPECS: - Sizes: 622mm, 571mm - Weight: 420g, 400g - Hole Counts: 28, 32 - Width: 19.3mm
- Original equipment replacement rim for Bontrager Line wheels - Tubeless ready design - Optimize with Bontrager TLR sealant, TLR rim strips, valve stems, and tires (all sold separately) - Welded seam - Presta valve - 28 spoke holes - Aluminum
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Whisky Parts Co. is at it again—pushing the category forward with the carbon No. 9 Rim. Far from just another wide, lightweight rim offering flotation and stability, No.9 sets the new standard for durability and tubeless reliability with hookless sidewalls and Whisky's new TBLS bead profile. These design features create a stronger and stiffer sidewall with more impact resistance, while making tubeless set-up simple. The proprietary shape and layup result is torsionally stiffer than single wall carbon offerings. These will have you rolling for years to come. - Engineered for disc brake only - Matte unidirectional carbon finish - 6k internal carbon fiber weave at spoke bed - Designed to be used with spoke washers - 30psi max tire pressure - Max tire is 3.8" - Rider weight limit: 300lbs
Trail riders, fatbike racers, and ultra-endurance athletes looking to add a refined, lightweight, tubeless wheelset to their fat bikes need look no further than Whisky's No.9 70w rim. While it’s optimized for use with 3.8–4.6-inch tires, it’s compatible with tires up to 5.05-inches wide. It utilizes a double-wall construction to ensure a sturdy, stout rim profile that maximizes cornering stability. With an inner width of 65mm, fat tires mimic the look and feel of traditional mountain bike tires when mounted to the 70w. That combo offers unmatched trail-attacking traction with a confidence-boosting wide footprint, making it one of the most versatile fat rims on the market.
Whisky's 80w rims offer 27.5inch fatbike users a light weight, easily tubeless platform. They help maximize the inherent rollover and longer contact patch 27.5-inch fat tires offer, while combating the weight penalty a larger diameter alloy rim can exhibit. True to form as their other rims, Whisky's TBLS beads offer secure tire performance at low pressures.
Whisky's No.9 100w rim has a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inches wide. Its double-wall construction makes it a unique, one-of-a-kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. If you’re looking for the best in winter traction, the No.9 100w has you covered.
Whether it’s 'cross, road, or mountain, nothing makes your bike feel faster than a good set of wheels. The Whisky No.9 carbon rims are performance-driven designs that offer excellent durability and features to create a torsionally stiffer rim, compared to single wall carbon offerings. Available in multiple sizes and widths, Whisky’s rims have you covered no matter what or where you ride. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
After a red nose, one of the most identifiable traits of a clown is his footwear. They're huge. So are Surly's Clown Shoe rims. At 100mm wide they greatly increase the tire footprint and give you more stability and float in loose terrain. The material between the spokes is drilled out to reduce weight and 64 spoke holes let you build them up centered or offset.
$115.00 - $135.00
Surly's 50mm wide Rabbit Hole Rim lets you build a wheel that accepts a tire with a large footprint for outstanding control, and traction. This anodized-aluminum hoop has 64 spoke holes and can be built centered or offset. Also, material has been removed everywhere possible (without affecting strength) to keep the rim as light as possible for quick acceleration.
65mm wide like Large Marge, Marge Lite shaves a lot of weight over regular Marges while retaining torsional stiffness. This rim, like Surly's Rolling Darryl and Clown Shoe rims, utilizes a 64 dual-spoke hole pattern. Lace 32 holes all on one side when building for frames with offset, such as our Pugsley and Moonlander. Lace 32 holes skipping side to side for non-offset frames or forks. - Wheel Size: 26 - Hub Compatibility: 32h hubs - ETRTO*: 559mm - Weight: 690g *Tire bead seat diameter
My Other Brother Darryl is a single-wall constructed, 80mm wide rim. 80mm wide rims give you a bigger footprint than that of narrower rims, which means more floatation and more traction. To initiate tubeless sequence, you just need a no-stretch rim strip and bead-to-bead tubeless rim tape. My Other Brother Darryl comes with either a 32 hole, symmetric wheel lacing spoke hole pattern or the tried and true 64 dual spoke hole pattern that allows for symmetric or offset wheelbuilds. It's got plenty of cutouts to keep the weight down and help your tires float through the squishiest of terrain. - Wheel Size: 26 - Hub Compatibility: 32h - ETRTO*: 559mm - Weight: 710g (Symmetric) 740g (Dual) - Color: Black or polished silver *Tire bead seat diameter.
- Size : 700c - Model : Race - Holes : 24 - ERD : 596mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Rear - Rim : Asymmetric - Weight : 465g
$59.99 - $79.99
- Original equipment replacement rims for Bontrager Race Lite wheels - Welded Seam - Presta Valve
If the long and winding road is your cup of tea, then Mavic's A319 is the rim of choice. Designed with the touring and trekking crowd in mind, the A319 utilizes burly double-walled box construction and double eyelets, as well as Mavic's control-enhancing UB brake surface, to ensure that your cross-country travels are worry free.
When traction is king, go wide! SPANK Industries has been an innovator in wide rim design for over a decade, and the OOZY Trail 345 Rim is the culmination of these efforts. Boasting a 30mm inner width, the OOZY Trail 345’s design optimizes performance with the widest range of tire shapes and sizes on the market. This wider internal width improves tire spread, effectively increasing traction, without squaring tire profiles excessively, which can lead to reduced maneuverability and cornering traction. The OOZY Trail 345 Rim combines the strength of Dynamal alloy, the stiffness of Spank’s patented Oohbah reverse-well profile, and the enhanced tubeless performance of Bead Bite anti-burp rims hooks into a lightweight, trail-tuned package. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 27.5" / 29" - Weight (g): ±520 (27.5") / ±540 (29") - Hole Count: 32H - Inner / Outer Width (mm): 30 / 34.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: shotpeen anodized, laser logos - ERD (mm++): 554 (27.5") / 591 (29") - ETRTO (mm): 584x30 (27.5") / 622x30 (29") - All Technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Discipline: trail
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires
• Rubber rim strips sold in bundles of 50
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
- Original equipment replacement rims for Bontrager Race XXX Lite wheels - Aluminum - 29-inch - 28 spoke holes
- Original equipment replacement rims for Bontrager Rhythm wheels - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve - Model : 2014 Rhythm Pro Carbon - Holes : 28 - Color : Black - Finish : Nude - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Asymmetric - Weight : 400g
• Original equipment Bontrager AT series rims • Double wall construction • Disc brake compatible • Pinned seam • Presta valve • Aluminum • 32 holes
- Original equipment replacement Bontrager Camino rim - Schrader valve - 36 spoke holes - Aluminum
$67.99 - $77.99
A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)
Original equipment Bontrager Camino rims. - Size : 26" - Model : Camino - Holes : 32 - ERD : 540mm - Color : Black - Finish : Anodized - Type : Clincher - Valve : Schrader - FT/RR/PR : Dual - Rim : Symmetric - Weight : 490g
- Original equipment replacement Bontrager Mustang rims - Tubeless Ready Design - Optimize with Bontrager Super Juice, Tubeless Ready rim strips, valve stems, and tires - Welded Seam - Presta Valve
Page 1 of 4 Next page