Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$17.99
Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.
$70.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.
$38.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$17.98
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
- Weight: 12g
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
$1.20
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side.
- Hinged clamps for easy installation without removing other components
- AL-6061, anodized black
- 23 grams
- For use only with I-Spec II compatible shifters or dropper lever
$19.00
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
$17.98
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system.
- Thread Length: 9mm
- Thread Pitch: 15 x 1.5mm
$29.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).
$20.00 - $24.99
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Features
- E-Bike specific kickstand
- Designed to handle the additional weight of battery assisted Giant bicycles
- Adjustable leg assures the perfect fit for all frame sizes
Fits:
- Road-E
- Quick-E
- Dirt-E
- ToughRoad GX-E
- Explore-E
- Vall-E
- Amiti-E
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
$41.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
$41.99
Genuine replacement parts
Protection that's engineered to keep your ride looking good as new for years to come.
Keep your investment protected with durable armor designed specifically for your ride.
- Trek protective armor
- Model specific custom fit
- Specific to Bosch Gen4 motor systems
- Backwards compatible to 2020-2021 Rail 29
$16.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$9.40
Thin, durable clear chainstay protector with extra-strong adhesive.
- Overall length - 10.375
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$75.00
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
$52.61
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts
Page 1 of 61
Next page