Car Racks

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

The new Transfer v2 models can each be expanded to carry an additional bike with the 1-Bike Add-On. Increase the capacity of your 1-Bike, 2-Bike, or 3-Bike rack to carry up to 4 bikes* with all the features you expect at a price that's unexpected. *Add-Ons cannot be stacked. Only a single 1-Bike Add-On can be attached to Transfer v2 models. The 1.25"-2" Transfer v2 2-bike (SKU T202B) model cannot take a one-bike add-on. - Automotive-grade 750 hour salt spray hardware - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

"What if?" - When we asked the question, the Piston Pro X was the answer. Genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab the tires, keeping your bike secure, and your paint pristine. Low-profile integrated LED tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety. These and many other features culminate in a rack designed, built, and tested to push the envelope and provide you with unparalleled ease of use, peace of mind, and lasting value. This is the Piston Pro X. OneTap Hit the levers and watch as the cradle arms open automatically into position. Kuat's new patented hydro-pneumatic OneTap levers make loading your bikes easy, and fun. FastFit Wheel Chock System It's called FastFit for a reason: This patent-pending feature changes wheel sizes from 18" to 29" in seconds, tool-free. QuickConnect QuickConnect lets you expand or consolidate your Piston from 2 to 4 bikes in a matter of minutes. Current record: 44s. Foot & Hand Pivot Fold your Piston up or down with the convenient foot pedal. Have a fully loaded 4-bike? Easy Assembly EasyClip patent-pending tray tabs make assembling your Piston quick and painless. Spend all that time you save riding your bike. 99% Metal Construction Just because it's sexy doesn't mean it isn't heavy duty. The Piston Pro X is all metal and ready to take on all the adventure you can throw at it. TIGER DRYLAC The Piston Pro X is finished with TIGER DRYLAC, a class-leading powdercoat designed for the unforgiving conditions of both day-in, day-out commutes and epic road trips alike. Hard Wearing Hardware Igus bushings and 308 Stainless Steel, 750-hour salt spray automotive-grade hardware keep the burly, long-lasting trend going. This rack will stand up to years of demanding mileage and use. Liquid Painted Logo A little cherry on top: A liquid painted 3D logo finishes out the rack aesthetic adding dimension and style. LED Taillights QuickConnect patented trays and Add-Ons are prewired. LED lighting will connect and sync automatically when assembled. Connects to the vehicle via the included flat 4-pin connector. Magnetic Cable Docking Set up is as easy as snapping in the magnetic cable, and plugging the 4-Pin into your vehicle's trailer outlet. No confusing diagrams or head scratching routing. POGO Pins QuickConnect patented Add-Ons are pre-wired. Simply install the Add-On and the LED lightning will connect and sync automatically. Cable Management Provided magnetic clips let you manage the LED cable, keeping everything tidy and out of the way. Locking Security Tool No more Where's Waldo in your glovebox: The multi-purpose security tool locks in place at the end of the rack, ensuring it's always there when you need it. Flatlock Hitch Cam The patent-pending Flatlock hitch cam keeps things stable and its tamper-resistant head keeps it secure. Plus, we've added a stainless steel hitch lock for double security and additional peace of mind. High-Strand 12mm Cable Semi-integrated ultra flexible high strand 12mm cable, with plenty of length for the wheels and frames of all your bikes. The soft touch outer coating is also easy on your bikes.

Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 4 carries 4 bikes and includes Hollywood's separators and anti-sway stabilizers, which makes mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch holds the whole system steady even on bumpy roads. And with the universal heavy-duty metal hitch insert, the Traveler 4 fits 1 1/4- and 2-inch hitches so you can use your rack on different vehicles. - Not to be used on any trailer, fifth wheel, or towed vehicle - Weight: 28 lbs - Max weight capacity: 35 lbs per bike

Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 2 bikes. Also available in a 4 or 5 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 32.00 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty

Built for the RV Life, Made for Anyone Whether you're an RV full timer, enthusiast or someone with a 2" receiver, the SuperClamp HD has your bike transport covered. This heavy-duty hitch rack features all the same specs as our top-selling SuperClamp EX, including dual wheel-clamping hooks, tilting capabilities and light-grabbing reflectors, all built on a dedicated 2" receiver base. Proven to stand up to miles on the road, this RV compatible hitch rack is as rugged as they come. Life with the RV just got a little better. - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 50". - Compatible with bike tires up to 4".

Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

The RV Rider bike rack for RV's, motorhomes, and fifth wheels carries 2 E-Bikes (up to 80 lbs. each) on the back of an RV Motorhome, a 5th wheel, or a flat towed vehicle. Special features include universal heavy-duty wheel holders for heavy load carrying capacity. These wheel holders can fit any tire up to 5" wide and include a ratchet wheel strap. Locking frame grabbers secure the bikes in place. The frame grabbers can attach to a bike's frame or seat tube with a diameter range of 1"- 2", therefore Bike Adapters are not needed and should not be used. A locking cable and keyed alike hitch pin secure the bikes to the rack and the rack to the vehicle. The bike rack folds up when not in use and can tilt down for rear cargo access. A double-walled receiver tube handles the extra weight of the electric bikes. An included hitch tightener reduces motion inside the hitch (the receiver hitch must have a flange). A minimum class 3 trailer hitch is required to use this bike rack. - Capacity: Two Bikes (Max. 80 lbs per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy-duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame grabbers - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - Not intended for use with motorized gasoline bicycles, mopeds, motorcycles or 3 wheel bikes (trikes), or electric scooters - Rack Weight: 63.5 lb - Limited Lifetime Warranty

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

- Capacity: Two Bikes (Max. 80 lb per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame hooks - Patented "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Tilts down for easy cargo door access - Space between bikes: 10 - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - For step through bicycles you will need to also purchase a Bike Adapter - Rack Weight: 58 lb - Limited Lifetime Warranty - Not to be used on any trailer, fifth wheel or towed vehicle

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

When adventure calls, you need a hardy bike rack to get you and your collection of bikes there. That’s why Saris built the SuperClamp 4-bike from the ground-up to be the safest, toughest, and lightest 4-bike platform hitch rack on the road. It all comes down to its super compact design, with two bikes carried on a single horizontal bar. Plus, each bike rack undergoes unparalleled testing in the heart of tundra country – meaning, if it survives in Wisconsin, it will thrive wherever your compass leads. When it comes to durability, versatility and carrying capacity, the SuperClamp 4-bike packs a punch in its light, 63 lb package. In fact, the SuperClamp is 40% lighter than similar platform hitch racks, yet is guaranteed to last a lifetime thanks to its tough steel construction. Load it up with mountain bikes, electric bikes, kid’s bikes, road bikes, insert-any-bike-type-here bike, and the SuperClamp will carry them safely to their destination. No matter where your bike wants to go, the SuperClamp 4-bike is up for the challenge. - Rock-solid dual hooks provide unmatched security, and never touches the bike’s frame. - Brawny, yet lightweight – designed to carry two bikes on a single bar for a footprint that is both compact and able to carry up to 4 bikes of any type (190 lb total). - Load ‘em up! Crafted to haul a wide variety and combination of bikes. - Tilting feature allows access to rear of vehicle, even when fully loaded (your dog will thank you), and folds up when not in use. - Functional, eye-pleasing design that looks good on any car and features integrated locks, reflectors and of course - a bottle opener.

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

Lightweight, platform hitch bike rack that is perfect for a variety of bikes, keeping them safe and secure on any journey. - Easy to load and securely holds the bike using the frame-friendly clamps that come with locks - Securely holds a variety of bike frame shapes with the versatile pivoting cushioned bike clamps - Accomodates a variety of bike tire sizes including road, mountain and fat tires using the sliding wheel trays with adjustable straps (up to two bikes) - Fits both 2" and 1.25" receivers with STL2 bolt included to lock carrier to vehicle - Folds when not in use

For rides long or short, bring your bikes with ease. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates a wide variety of bike sizes/frame styles - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easily transfers between 1.25” and 2” hitch receivers Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 28.3 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 28 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers

Make that spare tire work for a living – the SpareRide easily attaches to your rear-mounted spare and turns it into a bike rack. Durable, stable and secure, it installs easily. SuperCush cradles securely hold and protect your bikes, a bottle opener opens bottles, and integrated SKS locks bum out bike thieves. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Anti-sway cradle design minimizes bike-to-bike contact - Fits nearly any stock size spare - SKS locking package secures bikes to rack to help prevent theft - TireTread pads add stability and protection - Steel construction is strong and durable - Universal mounting plate with extension fits most lug patterns - Locking knob secures rack and sparetire to vehicle - Yakima signature bottle opener lets you enjoy a post-ride cold one - 2-bike capacity TECHNICAL SPECS - Weight: 21.50 lbs - Dimensions: L 40.00” x W 13.00” x H 19.00”

Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA

Custom adapter with integrated toolbox mount for installing Thule TracRac TracOne to the Toyota Tacoma 2016-present. - Easy to install with drill-free mounting

The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. You select the right model Q Clip for your vehicle. The Q Clips are coated to protect your vehicle's finish.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. You select the right model Q Clip for your vehicle. The Q Clips are coated to protect your vehicle's finish.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.