Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
Bike World Iowa has a stem with the fit, performance, and style you're looking for.
$54.99
The Box Two Front Top is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
-48mm: 234 g / 8.3 oz
-53mm: 240 g / 8.5 oz
$54.99
The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
· 48mm: 224 g / 7.9 oz
· 53mm: 230 g / 8.1 oz
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers.
-Lightweight 3D Hollow Design
-Front-Load Clamp Design to Fight Pull-Up Forces
-Large Bar Bore
-Large Hollow Clamping Bolts
-Superior Strength
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
-48mm: 280 g / 9.8 oz
-53mm: 290 g / 10.2 oz
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.
$79.99
Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.
These stems come with either a 48- or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes.
$24.99
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
$35.99
The DefendR BMX threadless stem has a AL6061 forged alloy construction and a 4-bolt face clamp.
- 30mm stack height
- 240g
$39.99
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
$41.99
The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.
$41.99
With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem.
- Hollow-core stem bolt
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
Trim some weight and add some style to your ride with Bontrager's Race X Lite OS Stem. Made from forged 7050-T6 aluminum, this stem is exceptionally light and strong. In fact, it's equally suited to the sharp impacts of mountain biking as it is to the long-mile rigors of the road. And, its shot-peened finish offers exceptional strength while the 4-bolt faceplate makes installation easy, and the opposed-bolt steerer clamp is carbon friendly.
Fly faster with Bontrager's XXX Carbon Road Stem. The carbon construction is strong enough to handle the torque from 1,800-watt road sprints. With a 4-bolt faceplate and angled steer clamp, the XXX stem distributes clamping loads evenly so its safe on ultra-lightweight carbon bars and steerers. This stem's feathery weight ensures your bike is that much lighter when the road tilts skyward and its carbon construction cuts down on road vibration so you never get numb hands. Plus, Bontrager carbon spacers and topcap are included.
The XXX Stem is still our lightest carbon fiber stem, but it's been redesigned with the new CnD shape profile for a more controlled and forgiving ride experience, providing you with consistent comfort to the Nth degree.
- Seamless accessory integration with Blendr XXX
- CnD shape profile increases torsional stiffness and vertical compliance
- Double-barrel, single-bolt (M6) system clamps evenly and conveniently
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 titanium face plate bolts with 5.2Nm torque spec
- Safe for use with carbon and alloy steerer tubes and handlebars
- Suitable for road or mountain use
$30.99
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes.
- 6061-T6 cast body construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts
- Blendr ready for seamless accessory integration
- Compatible with Blendr Elite bases and Blendr mounts
- Suitable for use on a road, city, or mountain bike
- Safe for use on carbon steerer tubes and handlebars
$31.99
Get back on the road with an original equipment stem.
Original equipment replacement stem for your bike.
PRODUCT DETAILS
- High-quality alloy adjustable stem is quill-style, for use with threaded forks
- 50mm stack height adjustment allows for a wide range of fit options
- Features 64 degrees of angular adjustment
- Seamless integration with Bontrager's Elite Blendr mount kit, sold separately
- Faceplate Bolt Torque: 7Nm
- Steerer Bolt Torque: 20Nm
- Pivot Bolt Torque: 27Nm
- Quill Length 220mm
$41.99 - $44.99
Genuine replacement parts
Get back on the road with a genuine replacement stem.
For optimal adjustability.
- High-quality alloy adjustable stem is compatible with threadless forks
- Features 64-degree angular adjustment for a wide range of fit needs
- 4-bolt dual band clamp retains stiffness and reduces weight
- Blendr ready for seamless accessory integration
- Compatible with Blendr Comp & Legacy Elite bases and mounts, sold separately
- Other parts are required to install this on a bike, you will be prompted to add the appropriate parts to your cart along with this item
$41.99
An oversized 35mm clamp diameter stem suitable for all disciplines of mountain biking.
Oversized strength
The Elite 35 stem is the perfect addition to any mountain bikers' cockpit. Forged from lightweight 6061-T6 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 6061-T6 3D forged aluminum construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- High-strength, corrosion-resistant steel bolts
- Approved for use with carbon handlebars
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride.
Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
$64.98 - $64.99
Stiff and light with the cleanest accessory solutions available
When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup.
Key features
- Seamless accessory integration with Blendr Elite
- 6061-T6, 3D, forged alloy construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp
- Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec
- Safe for use on carbon steerer tubes and handlebars
- Includes one Blendr base to integrate Ion lights and Trip computers.
$99.99
A lightweight, all-mountain stem with the burly attitude of a billy goat to tackle everything the mountain throws your way.
All-mountain tough. XC light. No compromise.
Bashing through rock gardens and nailing big hits puts incredible strain on a mountain bike stem. Luckily the super stiff, torsion-resistant body and wide faceplate of the Rhythm Pro stem is XC light and all-mountain tough ,providing you with more control of the trail.
- 7050-T6, 3D, forged alloy construction
- Wide, 4-bolt, alloy handlebar clamp
- Opposing 2-bolt steerer tube clamp
- Corrosion-resistant steel bolts
- Designed for aggressive technical trail riding, but suitable for road or mountain use
- Not for use on carbon steerer tubes
- Safe for use on carbon handlebars
- Go green and save green – Zero packaging means zero waste and zero extra cost
$114.99
Light and stiff alloy stem, with Blendr accessory integration that is at home on the road or mountain bike.
The smarter upgrade
The forged alloy construction means you'll get the stiffness you demand but in a weight that'll make others jealous.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Go green and save green - Zero packaging means zero waste and zero extra cost
$120.99
Strong, light, and capable
The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system.
An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- Available in a wide range of sizes for today's mountain rider
- High-strength, corrosion-resistant steel bolts
- Approved for carbon bars
$120.99
A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer.
Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- High-strength, corrosion-resistant steel bolts
- Includes Blendr mono base, Garmin Mount, and Ion Light Mount
- Approved for carbon bars
$120.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$64.99
Cult Redemption stem, for when you want a topload stem but without so much rise.
- Wider and beefier than the OG Salvation stem
- Improved clamping area
- Recessed compression bolt for a clean look
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
$64.99
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look.
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
- Stem Type: Top Load
$69.99
Dakota Roche signature stem. Beefy but slick 1" OD clamping area for extra strength.
- Bar Clamp Diameter (mm): 25.4
- Steerer Clamp Diameter: 1-1/8" ins
$219.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
$29.99 - $34.99
Dimension 26.0 Stems
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Fully forged AL-6061-T6
- 4-bolt handlebar clamp
- Weight: 140g-180g
$31.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g
$36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$140.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
$280.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
- Material: Carbon
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec, Steer Tube: 5.5Nm
$300.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$300.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Carbon
- S.H.I.S. Stem Clamp Diameter: 28.6
- Stem angle: 0-degree
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
$44.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
$69.99
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount.
- 3D Forged EA70 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- Finish: Black Ano
- Weight: 132g (100mm/0)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars.
- Finish: Black Ano
- Weight: 130g (100mm)
- Rise: Varies
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
- Materials: EA90 alloy
$99.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the newest generation of EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We've also created a custom Garmin mount, known as the ICM system, for cleaner lines and improved aerodynamics (included). Our EA90 stem comes in at 120 grams (100mm). With weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- 3D Forged EA90 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- EA90 includes Easton ICM Garmin computer mount
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$159.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7-deg
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 70mm, 80mm, 90mm, 100mm, 120mm
- Materials: EA90 alloy
- Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
$19.99
Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.
FSA's OS-190 Stem is a worthy upgrade for your favorite two wheeled machine. It's made of forged and machined aluminum, so it's light, durable and strong enough for any road or mountain riding adventure.
$34.30
FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged face plate
- Chromoly hardware
- ±6°
- 31.8mm handlebar clamp diameter
- 35mm fork clamp stack height
- 127 grams (100mm)
$37.00
3D-forged and CNC-machined AL6061/T6 mountain bike stem.
- 4-bolt cold-forged alloy faceplate
- Chromoly hardware
- 40mm fork clamp stack height
$63.00
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged front clamp diameter
- Chromoly hardware
$67.50
The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style.
- 3D forged and CNC machined from AL6061/T9
- 4-bolt cold forged front clamp
- 40mm clamp stack height
- Weight: 149g
$81.00
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets.
- Stack Height: 40mm
- Weight: 180g
$99.99
Update your road or mountain bike with FSA's Energy Stem. 3D-forged and CNC machined aluminum construction makes this stem stiff and light for power transfer and steering precision. The four-bolt, carbon fiber faceplate holds bars securely, and this stem features titanium bolt hardware. The offset steerer clamp provides even clamping pressure on carbon steerer tubes.
$112.00
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package.
- Semi Integrated Cable routing (SCR)
- 3D-Forged and CNC-machined from AL2014
- 4-bolt sculpted SL faceplate
$124.00
FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding.
- Aerodynamic Cable Routing (ACR)
- Low-profile frontal area
- No rotation limit
- Body and faceplate - 6061 T6
- Chromoly hardware
- Specific frame and headset required
- 31.8mm handlebar clamp diameter
- 30mm fork clamp stack height
- Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars
$186.20
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon.
- Stack Height: 41mm
- Weight: 126g (100mm)
$63.00
- Giant's advanced alloy manufacturing process for a 35mm clamp diameter with maximized strength at minimal weight.
- Not OD2, regular 1-1/8".
$320.00
ULTIMATE PERFORMANCE
Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT
With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION
The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT
Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
FEATURES
- Compatible with all Giant OD1 and OD2 head tubes sizes
- Available in ±10° and ±20° angles
- Available in eight lengths from 70 to 140mm
- Purpose-engineered shaping achieves maximum stiffness and lowest weight
- Integrated aero silhouette from stem cap to spacers
Page 1 of 4
Next page