Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
Bike World Iowa has a stem with the fit, performance, and style you're looking for.
$599.00
Taking cues from the legendary Ritchey Bullmoose mountain bike bar, as well as more recent Ritchey road combo bars such as the SoloStreem and MonoCurve, the SuperLogic Butano Ridge fills the demands of adventurous riders calling for a carbon fiber version of the Butano. We’ve doubled down on the original concept of the Butano by blessing it with the SuperLogic treatment and delivering an integrated bar/stem combo that is lightweight, stealthy, and more than capable of handling the rough stuff when it turns into fast rough stuff. This magnificent monocoque carbon fiber beauty offers complete internal cable/wire/hose routing for modern gravel and road bike frames. The underside of the bar features a removable cable cover offering easy access for cable routing and doubles its duty with the ability to receive an integrated accessory mount (sold separately). The breathtaking aesthetics of the Butano Ridge are well complimented by its supreme comfort and control afforded by its shallow drop, short reach, and pleasant backsweep – as well as the ergo aero tops that deliver logical ergonomics.
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
- Material: Carbon monocoque with forged alloy steerer clamp
- Stem Angle: 84 -degree
- Drop/Reach: 126/75mm(Measured center-to-center where the levers mount)
- Sweep/Flare: 4.7/1-degree
- Features mounting holes for computer/accessory mount
- Matte UD carbon finish
- Weight: 350g (42cm x 100mm)
$369.99
Get back on the road with a genuine replacement stem.
Original equipment replacement stem for your Madone SLR.
PRODUCT DETAILS
- High fit stem is 7-degrees of drop
- Not compatible with other bikes
- For installation instructions, please see your Madone Assembly Manual
$320.00
ULTIMATE PERFORMANCE
Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT
With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION
The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT
Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
FEATURES
- Compatible with all Giant OD1 and OD2 head tubes sizes
- Available in ±10° and ±20° angles
- Available in eight lengths from 70 to 140mm
- Purpose-engineered shaping achieves maximum stiffness and lowest weight
- Integrated aero silhouette from stem cap to spacers
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
- Material: Carbon
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec, Steer Tube: 5.5Nm
$300.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$300.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Carbon
- S.H.I.S. Stem Clamp Diameter: 28.6
- Stem angle: 0-degree
$280.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
$285.00
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment.
- Updated distinctive Zipp cosmetics
- Designed using SRAM Exogram technology
- New SL Speed Stem weighs just 123g (100mm)
- ±6° carbon stem
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated mount available separately
$285.00
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs.
- Updated distinctive Zipp cosmetics
- Carbon Exogram construction delivers the stiffest stem on the market gram for gram.
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated computer mount available separately
$249.99
The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable.
Benefits:
- Go further—reduce fatigue from bumps and vibrations
- Ride faster—energy that is normally wasted suspending your body is converted into forward motion
- Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain
- GPS and Utility Mounts sold separately
Details:
- Titanium Hardware
- 15% Reduction in Weight over standard ShockStop
- Refined premium finish
- The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths
- Effective suspension travel: up to 20mm
- Includes 5 swappable elastomers to fine tune your riding style
- Check technical specs for compatibility
What's in the Box:
- 1 x ShockStop PRO Stem
- 5 x swappable elastomers (2 pre-installed, 3 additional in box)
- All required hardware
$249.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
$233.59
- Full UD carbon construction stem
- 4 bolt aluminum faceplate for added rigidity
- Stainless steel hardware
- Reversible +/-7° angle
- 40mm stack height
- 125g weight in 100mm length
- ISO-Road safety certified
$219.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
$169.99 - $189.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations.
- Unwanted vertical movement is absorbed by twin interchangeable elastomers
- Stem retains torsional rigidity
- Travel is limited to 1-2 centimeters
- Made with 6061-T6 Aluminum
- Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
$186.20
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon.
- Stack Height: 41mm
- Weight: 126g (100mm)
$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware.
First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.
The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout.
- Material: 3D forged 7075, carbon encased body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8 bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Steerer Height: 42mm
- Steerer: 1-1/8”
- Faceplate Width: 42mm
- Matte UD carbon finish
- 126g (110mm)
$179.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout.
- Material: 3D forged 7075, carbon encased body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8mm bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Stack: 42mm
- Steerer: 1-1/8"
- Faceplate Width: 42mm
- Matte UD carbon finish
- 126g (110mm)
$159.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7-deg
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 70mm, 80mm, 90mm, 100mm, 120mm
- Materials: EA90 alloy
- Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
$147.50
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy.
- Stack height: 36mm
- Weight: 155g (90mm)
$142.00
Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes.
- Distinctive Zipp cosmetics
- Wide range of sizes and angles.
- Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes
- Zipp Quickview integrated computer mount available separately
- Lifetime warranty
$140.45
- CNC machined 2014 aluminum body and 7075 aluminum clamps
- 240 degree wrap-around, twin plate clamping system
- External webbing to maximize structural strength
- 118-158g including stainless steel bolts
$140.45
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure.
The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
$140.45
Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure.
The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
$140.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
$139.99
A lightweight alloy stem with a flush mount top cap and seamless cable routing offer a fully integrated and elegant aesthetic.
Integrated elegance
The RCS Pro Blendr Stem is a sleek alloy stem offering all of the performance you crave, with looks to match. Specifically designed for use with model year 2023 Domane SL, SLR, and RSL bikes, this stem fits seamlessly with the headset top cap to provide ultimate integrated elegance. A flush mount top cap, under-stem cable routing cover, and Blendr compatibility further add beauty and sophistication.
Product details
- Lightweight 7075 alloy construction
- High-quality M5 corrosion-resistant face plate bolts with 5.2Nm torque spec
- Cable routing cover keeps up to six cables and wires tidy under stem
- Included Blendr Duo Base makes it easy to integrate accessories
- Blendr accessory mounts sold separately
- Compatible with model year 2023 Domane SL, SLR, RSL bikes
$132.95
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem
- Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
$130.00
Designed as a replacement for the AM stem, the all-new TR stem matches the aesthetic of the Gravity stem but is tailored for downcountry/trail and all mountain use.
KEY FEATURES
- Opposing steerer clamp bolts to give exceptionally rigid steering characteristics
- 2 piece front plate design with a simple “no gap” clamping system
- Optimum machining to give lightest weight without compromising stiffness
- 32, 40 and 50mm lengths Ø31.8mm clamp
- 35, 40 and 50mm lengths Ø35mm clamp
- CNC machined from a solid billet of 2014 T6 aluminium
- Zero rise
- 56mm clamping width
- Stainless steel taper head screws supplied
- To suit Ø31.8mm and Ø35mm bars
- Available in: black, silver, red, blue, purple, orange and new bronze
- Weights 32mm reach, Ø31.8mm – 123g // 40mm reach, Ø31.8mm – 131g // 50mm reach, Ø31.8mm – 150g // 35mm reach, Ø35mm – 121g
$124.00
FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding.
- Aerodynamic Cable Routing (ACR)
- Low-profile frontal area
- No rotation limit
- Body and faceplate - 6061 T6
- Chromoly hardware
- Specific frame and headset required
- 31.8mm handlebar clamp diameter
- 30mm fork clamp stack height
- Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars
$120.99
Strong, light, and capable
The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system.
An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- Available in a wide range of sizes for today's mountain rider
- High-strength, corrosion-resistant steel bolts
- Approved for carbon bars
$120.99
A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer.
Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- High-strength, corrosion-resistant steel bolts
- Includes Blendr mono base, Garmin Mount, and Ion Light Mount
- Approved for carbon bars
$120.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$120.00
Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes.
- Distinctive Zipp cosmetics
- Zipp Quickview integrated computer mount available separately
- Lifetime warranty
$114.99
Light and stiff alloy stem, with Blendr accessory integration that is at home on the road or mountain bike.
The smarter upgrade
The forged alloy construction means you'll get the stiffness you demand but in a weight that'll make others jealous.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Go green and save green - Zero packaging means zero waste and zero extra cost
$112.00
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package.
- Semi Integrated Cable routing (SCR)
- 3D-Forged and CNC-machined from AL2014
- 4-bolt sculpted SL faceplate
$109.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build.
- Four-bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry
- Faceplate eliminates stress risers which cause your bar to bend or break
- Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube
- Stack Height: 40mm
$109.99
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up.
- Machined from 2014 Aluminium
- Weight-saving single bolt faceplate
$109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength.
- CNC Aluminum
- 0-degree rise for perfect fit on aggressive bike frames
- Extensive CNC machining for weight reduction without impacting strength
- TopLock faceplate design for easy and secure installation
$109.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 25D Stem offers 25-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout.
- Material: 3D forged and internally machined 2014 alloy body
- CrMo faceplate bolts and patented 220 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly
- Stainless steel steer tube bolts and curved clamp slot reduces weight and steer tube stress
- 5Nm torque max on all hardware
- Fits most road and mountain bars
- Installs without the removal of levers
- Angle: 25-degree
- Stack: 45mm - Steerer: 1-1/8"
- Faceplate Width: 40mm
- Blatte finish
- 120g (90mm)
$109.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout.
- Material: 3D forged 2014 alloy body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8mm bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 73/17 degree
- Stack: 45mm
- Steerer: 1-1/8"
- Faceplate Width: 42mm
- Blatte finish
- 121g (110mm)
$109.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout.
- Material: 3D forged 2014 alloy body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8mm bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Steerer Height: 42mm
- Faceplate Width: 42mm
- Blatte finish
- 121g (110mm)
$109.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.
- The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar
- Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars
- Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
$99.99
A lightweight, all-mountain stem with the burly attitude of a billy goat to tackle everything the mountain throws your way.
All-mountain tough. XC light. No compromise.
Bashing through rock gardens and nailing big hits puts incredible strain on a mountain bike stem. Luckily the super stiff, torsion-resistant body and wide faceplate of the Rhythm Pro stem is XC light and all-mountain tough ,providing you with more control of the trail.
- 7050-T6, 3D, forged alloy construction
- Wide, 4-bolt, alloy handlebar clamp
- Opposing 2-bolt steerer tube clamp
- Corrosion-resistant steel bolts
- Designed for aggressive technical trail riding, but suitable for road or mountain use
- Not for use on carbon steerer tubes
- Safe for use on carbon handlebars
- Go green and save green – Zero packaging means zero waste and zero extra cost
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars.
- Finish: Black Ano
- Weight: 130g (100mm)
- Rise: Varies
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
- Materials: EA90 alloy
$99.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the newest generation of EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We've also created a custom Garmin mount, known as the ICM system, for cleaner lines and improved aerodynamics (included). Our EA90 stem comes in at 120 grams (100mm). With weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- 3D Forged EA90 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- EA90 includes Easton ICM Garmin computer mount
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$99.99
Update your road or mountain bike with FSA's Energy Stem. 3D-forged and CNC machined aluminum construction makes this stem stiff and light for power transfer and steering precision. The four-bolt, carbon fiber faceplate holds bars securely, and this stem features titanium bolt hardware. The offset steerer clamp provides even clamping pressure on carbon steerer tubes.
$99.99
Full CNC machined AL6061-T6 alloy construction
- 35mm stack height
- 4 bolt front loading faceplate design
$99.99
Full CNC machined AL6061-T6 alloy construction
- 40mm stack height
- 4 bolt front loading faceplate design
- EN-Mountain safety certification
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility.
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry
- Faceplate eliminates stress risers which cause your bar to bend or break
- Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube
- Stack Height: 40mm
$99.99
- Highly weight optimized single crown stem for use with 35mm handlebars
- Dial your fit with micro increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike
Specs:
- Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body
- Rise (°): 0
- Diameter: 35mm
- Stack height: 34mm
- Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm)
- Finish: Shotpeen anodized
$99.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars
- Human Factor Design features micro increment size options, tuned to fit any rider size and style
- Human Factor cockpit setup index facilitates tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness
- Shot peen-anodized surface increases strength, durability, and fatigue life
Features:
- Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate
- Rise (°): 0
- Diameter: 31.8mm
- Stack Height: 34mm
- Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm)
- Finish: Shotpeen anodized
$99.95
The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you.
- Matching top cap included
- 6° of positive or negative rise
- 1-1/8" steerer diameter
- Stem body wraps 220° around bar clamping area, holding it in place for easy installation
- Material: 2014 alloy
- Bolts: stainless steel black
- Matching top cap included
- Angle: 84°/6°
- Bar clamp diameter: 31.8mm
- Bar clamp width: 44mm
- Steerer diameter: 1-1/8" (28.6mm)
- Steerer height: 42mm
- Weight: 140g (100mm)
$99.95
The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail.
- Material: 3D Forged 2014 alloy
- Angle: Zero rise
- Steerer Height: 45mm
- Faceplate Width: 40mm
- Steerer: 1-1/8”
- Ritchey Blatte finish
- 115g (70mm)
$95.00 - $96.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers.
- Star-nut should be approximately 1cm from the top of the steerer tube
- Minimum 55mm of steer tube required
- Not compatible with carbon steerer tubes
- No top cap needed. Stem includes tension bolt
$82.99
- Full CNC machined AL6061-T6 alloy construction
- Designed for use with oversized 35mm handlebars
- 35mm stack height
- 4-bolt front loading faceplate design
- ISO-Mountain safety certified
Specifications:
- Fork Dia: 1-1/8"
- Bar Clamp: 35
- Angle: 0°
- Material: AL6061
- Finish: Polished
$81.00
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets.
- Stack Height: 40mm
- Weight: 180g
$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.
- ±6° angle
- Integrated GoPro mount
- T25 fasteners for 1 tool across the cockpit
SPECIFICATIONS
- Stem Angle/Rise: 6 degrees
- Clamp diameter: 31.8mm
- Steerer clamp diameter: 1-1/8 in
- Hardware: Steel
Page 1 of 4
Next page